Internal options for StorageWall
James Tobias manufacture a wide range of internal fittings from steel in-house to provide additional strength. With tool-less installation of the internals, it makes it very quick and easy to adjust and reconfigure. All internals fit into a bespoke aluminium extrusion providing a 25mm adjustable pitch. Illustrated below are the most popular fitments that are used to accommodate a myriad of items that need to be stored by employers and employees in today’s modern office building.
Scroll right to view range →
1
3 x Roll out filing frames. 1 x Combination shelf with pigeon holes above. 3 x Adjustable plain steel shelves.
2
3 x Drawer fronted deep drawers. Clad alcove with glass shelves and downlighters.
3
8 x Combination shelves for lateral filing pockets. 1 x Roll out reference shelf.
4
6 x Adjustable plain steel shelves.
5
2 x Adjustable plain steel shelves. 1 x Combination shelf. 2 x Front to back coat rails.
6
Chiller (example only) and low level double doors with double clad alcove for media screen above.
7
Chiller (example only) and low level double doors with double clad alcove for media screen above.
8
Double door module with top box.
9
Personal lockers, individually locking compartments for personal storage.
10
600 Deep cloaks unit. 3 x Adjustable plain steel shelves. 1 x Lateral coat rail.
11
1 x Roll out filing frame (shown with dividers). 2 x Shallow drawers. 1 x Combination shelf with mini pigeon hole above. 1 x Lateral cradle. 1 x Slotted shelf with dividers.
12
3 x Deep drawers. 1 x Roll out reference shelf. 1 x Slotted combination shelf. 1 x Slotted shelf. 2 x Adjustable plain steel shelves.
- Unit 1 – 3 x Roll out filing frames. 1 x Combination shelf with pigeon holes above. 3 x Adjustable plain steel shelves.
- Unit 2 – 3 x Drawer fronted deep drawers. Clad alcove with glass shelves and down lighters.
- Unit 3 – 3 x Lateral cradles. 1 x Roll out reference shelf. 3 x Combination shelves for lateral filing pockets. 2 x Lateral Cradles.
- Unit 4 – 6 x Adjustable plain steel shelves.
- Unit 5 – 2 x Adjustable plain steel shelves. 1 x Combination shelf. 2 x Front to back coat rails.
- Unit 6 & 7 – Chiller (example only) and low level double doors with double clad alcove for media screen above.
- Unit 8 – Double door module with top box.
- Unit 9 – Personal lockers, individually locking compartments for personal storage.
- Unit 10 – 600 Deep cloaks unit. 3 x Adjustable plain steel shelves. 1 x Lateral coat rail.
- Unit 11 – 1 x Roll out filing frame (shown with dividers). 2 x Shallow drawers. 1 x Combination shelf with mini pigeon hole above. 2 x Combination shelves. 1 x Adjustable plain steel shelf.
- Unit 12 – 3 x Deep drawers. 1 x Roll out reference shelf. 1 x Slotted combination shelf. 1 x Slotted shelf. 2 x Adjustable plain steel shelves.
Calculating Storage Capacities
The following calculations can be used to determine the optimium capacity of the StorageWall units relative to the floor to ceiling height and 25mm pitch of the adjustable aluminium support grid.
Shelves – Shelves can be located and adjusted on the 25mm grid to support files, catalogues or storage boxes as required.
Where A4 lever Arch files are used the shelves should be positions at 350mm centres and the storage capacity can be calculated with this formula:
- Floor to ceiling height – 200mm (head and base sections) / 350mm (File)
- Example: ceiling height 2650mm – 200mm = 2450mm / 350mm = 7 No. Levels, therefore 6 No. adjustable shelves required as the base shelf is part of the unit.
Combination Shelves – All combination shelves are designed to support lateral filing pockets with 330mm hanging centres (European Standard). These pockets will accommodate both “foolscap” and “A4” filing. Combination shelves should be spaced at 300mm centres in height and the capacity can be calculated.
- Floor to ceiling height – 200mm (head and base sections) / 300mm (files centres)
- Example: Ceiling height 2650mm – 200m = 2450mm / 300mm = 8 No. levels, therefore 8 No. combination shelves required.
Roll Out Filing Frames – Filing frames are designed to carry suspended filing which is either “front to back” or “left to right” indexing and are designed to support “foolscap” and “A4” filing pockets.
- Note 1 – Where “Foolscap” filing with indexing left to right, format is required, the storage unit depth must be 500mm.
- Note 2 – Roll out filing frames should be used at the bottom of the StorageWall unit and a maximum of 4 units in height should be adopted to ensure safe operation.